Inicio VISION WHEELS TOURNAMENT - ROAD TO THE FINAL Slowtwitch: Vision Trimax Carbon Si013 Review 28 Mar 2020 Vision Tech Guide: Washing your bike at home Whether you are a Pro or a simple cycling enthusiast, these days you could take the opportunity to take care of your bike with more accuracy. The maintenance of a bike is very important if you want to make sure that components last longer. There are specific products for washing bikes and removing grease. But which are the most important steps of bike washing?Let's deep together in our tech guide with the best tips to wash your bike.First, the bicycle is mounted on a work stand and, if it makes the cleaning process easier, the wheels are removed.Next, fill a water bottle with a biodegradable detergent and have it ready to use. Having a light solvent (like a citrus degreaser diluted with water) on hand is good for use on components like cassettes and cranks which have difficult to remove grime.When the wheels are removed, the chain is secured by a chainkeeper or dummy hub, which allows the chain to spin without rubbing on the frame. The frame, chain, crankset and other parts are now cleaned. Sometimes before wetting the bike, using a rag, larger bits of dirt and debris can be removed more easily.Begin by cleaning the drivetrain first (usually the dirtiest part of the bike). Brushes and component specific bike cleaning tools can help greatly in this process.Next, the wheels receive very special treatment. First, all parts are passed with a brush or clean rag to remove the dust, and then they are cleaned carefully with a sponge and detergent.On all parts, remove the detergent with water at low pressure. Unfortunately, the mechanics have to clean all the bikes of the team, and times are reduced, so they are forced to use this non-recommended method. Many professional teams use pressure washers or high-pressure hoses because of time constraint and, but this method isn’t recommended because water may penetrate component seals.The final step is drying. The bike is moved to another work stand and dried. Use compressed air if available, but do not blast bearings directly. Use a light lubricant on the chain, pulley wheels, cables, and pivots points. Reinstall cassette, if necessary, and install wheels back on a bike.After the bike is washed, take the time to rinse off the brushes and clean the repair stand. And now your bike is ready to ride.